Frequently Asked Questions

I got a new router or changed some settings on my router, and I can't access the device to make the device aware of the change. What do I do?
Last Updated 8 years ago

When the Wr300 device is setup it requests a new IP address from the router. This invalidates the address listed in the manual. To restore to default IP, the device must be reset. 

To reset the device, the reset button the the bottom or side of the device must be depressed. You will need a thumbtack or paper clip to hold the button for 10 seconds. The device MUST be connected to power for this to work.

After releasing the reset button, it may look like the device is not doing any thing, but after a moment there should be a change with the indicator lights on the front of the device. Once the lights change back, the device should be ready for new instructions.

Please Wait!

Please wait... it will take a second!